NEC VERSA VXi, Инструкция по обслуживанию и справочник, Страница: 53 / 123

System Configuration and Setup 2-31
4.
Enter MS-DOS. At the c: prompt, type
cd \necutils\hdprep
and press
Enter
to change to
the \necutils\hdprep directory.
5.
Type
HDPREPEZ
and press
Enter
. The utility automatically prepares the NEC Versa for the
newly installed memory.
6.
Power off the system and then power on. A file large enough to accommodate the system’s
memory is created on the hard disk drive.
SpeedStep Applet
Some processors that ship with the NEC Versa VXi notebook computer include Intel’s
SpeedStep technology that allows you to customize high-performance computing on the NEC
Versa to optimize processing speed and to conserve battery life.
If the processor has SpeedStep technology, an icon appears on the taskbar allowing you to adjust
processing properties. However, the default settings are recommended for optimal performance
and battery conservation.
SoftDVD Player
If the system comes with a DVD-ROM drive preinstalled, it has the SoftDVD Player CD. The
SoftDVD Player software allows playing DVD videos on the computer, and lets you control the
DVD-ROM drive with on screen controls.
The materials that come with the CD describe how to install and use the software, and onscreen
prompts provide guidelines during the installation. Once the software is installed, access the
onscreen SoftDVD help for information about using and configuring the DVD-ROM drive.
NEC CD-RW CD
If the NEC Versa system comes with a CD read/write drive preinstalled, it has the NEC CD-RW
CD. The CD read/write drive allows the loading and starting of programs from a CD and writing
information to a CD. The NEC CD-RW CD provides a driver, CDINIT, and two applications,
Easy CD Creator and DirectCD.
The materials that come with the CD describe how to install and use the software, and onscreen
prompts provide guidelines during the installation. Once the software is installed, access the on-
screen help for more information about using and configuring the CD read/write drive.
Personal Code Setting Utility
Use the Personal Code Setting utility along with the personal code buttons on the NEC Versa
VXi (available on some systems) to set a personal code and secure the system. Once the
personal code is set, the system will not boot until you enter the personal code. Use the
following procedures to install the utility and set up your personal code.
Installing the Personal Code Setting Utility
Use the following steps to install the Personal Code Setting utility.
1.
Double click the Personal Code Setting utility icon on the desktop. The Personal Code
Setting Utility Setup screen appears.
2.
Click Next to start setup. The Target Folder dialog box appears.
3.
Click Next to select the default target folder. A prompt to create the default target folder
appears. Click Yes.
4.
Click Finish to exit Setup.