manualshive.com logo in svg

NEC VERSA S, Руководство по обслуживанию, Страница: 71 / 100

Поделиться
Скачать
NEC VERSA S Скачать руководство пользователя страница 71

Troubleshooting and Repair     5-5

The following subsections provide corrective actions when the computer has an error con-
dition. Refer to the appropriate section and Table Section 5-2 to help isolate the problem.
Also see Table Section 5-2 if an error occurs and the system does not display an error mes-
sage or transmit a beep code. Table Section 5-2 summarizes problems that may develop
during system operation and lists (in sequential order) suggested corrective actions.

 Table Section 5-2   Problems and Solutions

 Problem

 Corrective Action

 No power

 1.

 Check that the AC adapter is plugged into the power
connector on the system. Also, that the AC adapter is
plugged into a properly grounded AC power outlet. If
using the battery as the main power source, see the
following step.

 

 2.

 Check that the primary battery pack is charged and
inserted correctly.

 

 3.

 Replace the system board.

 Data on the LCD is unreadable.

 1.

 Adjust the brightness and contrast controls.

 

 2.

 Check that the LCD is connected to the system
correctly.

 LCD screen does not show data.

 1.

 Power saving mode has shut off the backlight. Press
any key, Fn Esc or the suspend button.

 

 2.

 The built-in LCD may not be selected. Press Fn F2

 

 3.

 Brightness and contrast controls need adjustment.

 

 4.

 Plug in the AC adapter or replace the primary battery
pack. Press the suspend button to resume operation.

 Battery power does not last.

 1.

 Make sure the power management features are set.

 

 2.

 Replace the primary battery pack with a new one.

 System halts during loading
sequence.

 1.

 Check condition of selected bootload device (diskette
or hard disk) for bad boot track or incorrect OS files.

 

 2.

 Try booting from diskette or recopy operating system
files onto the hard disk.

 I/O processing malfunctions.

 1.

 Check the connections of all internal devices.

 Diskette drive does not work.

 1.

 Replace diskette drive.

 

 2.

 Replace the system board.

 Hard disk malfunctions.

 1.

 Check that the built-in IDE controller is enabled.

 

 2.

 Check drive cables and connections.

 

 3.

 Replace the drive if necessary.

 Suspend button does not work.

 1.

 The hard disk may be accessing data. Wait until the
reading/writing process stops and try again.

Содержание VERSA S





































































































Отзывы:

Нет отзывов