NEC VERSA S, Руководство по обслуживанию, Страница: 31 / 100

Setup and Operation 2-7
SurePoint and Selection Buttons
A pointing device that performs the functions of a mouse is located between the G, H, and
B keys. To move the cursor on the screen in a specific direction, press against the SurePoint
in that direction. The two selection buttons below the keyboard act like a left and right
mouse button on a two-button mouse.
Figure Section 2-10 SurePoint and Selection Buttons
Fn Key
The
Fn
key is used in conjunction with other control keys to perform preprogrammed func-
tions. To use these keys, press and hold the Fn key while pressing another control key. The
Fn and control key combinations provide the following system functions.
n
Fn-Esc
(the Suspend button) puts the system in Suspend mode. This initiates
power-saving features to conserve energy and battery power.
n
Fn-Home
(the Break key) stops whatever command is currently executing.
n
Fn-Pg Up
(the Print Screen key) sends the current screen to the assigned printer.
n
Fn-Pg Dn
(the Pause key) temporarily stops command execution.
n
Fn-End
(the Num Lock key) puts the system in Num Lock mode and activates the
embedded keypad.
n
Fn-F2
— toggles between three settings: LCD, CRT (external display), and Both.
n
Fn-F3
— for monochrome models only. Toggles between normal and reverse text
on the LCD screen. For example, if the screen shows white text on a black back-
ground, it changes to black text on white.
n
Fn-F4
— increases the display brightness.
SurePoint
Selection
Buttons