NEC VERSA S, Руководство по обслуживанию, Страница: 37 / 100

Setup and Operation 2-13
n
Typematic Delay — Set the delay time between the key press and starting the re-
peat action. Select from the following millisecond (ms) values.

250 ms

500 ms – default setting

750 ms

1000 ms
n
Boot Password — Set a password to prevent unauthorized system use. When a
boot password is set, the system requires that the password be entered correctly
before completing the boot cycle.
n
Enter a password as follows.

Highlight “Boot Password” and press
Enter
.

When prompted, type a password that is from 4 to 8 characters long and press
Enter
.

When prompted to re-enter the password, enter the password again, and press
Enter
.
When the password entry is verified, Boot Password is enabled. No one will
be able to use the system without first entering the password. If the password
is forgotten, call the NEC Technical Support number listed in Chapter 4.
n
SCU Password — Set a password to access the SCU. When this option is en-
abled, no one can change system setup parameters without first entering the cor-
rect password. This option prevents someone from setting a boot password that
could deny a user access to the Versa S.
n
Set an SCU password as follows.

Highlight “SCU Password” and press
Enter
.

When prompted, type a password that is from 4 to 8 characters long and press
Enter
.

When prompted to re-enter the password, enter the password again, and press
Enter
.
When the password entry is verified, SCU Password is enabled. No one will
be able to use the SCU without first entering the SCU password.
If the password is forgotten, call the NEC Technical Support number listed in
Chapter 5.