NEC VERSA S, Руководство по обслуживанию, Страница: 33 / 100

Setup and Operation 2-9
SYSTEM CONFIGURATION UTILITY
The system uses the System Configuration Utility (SCU) to store information about the
Versa S hardware and software. Use the SCU to perform the following functions:
n
set date and time
n
change CPU speed
n
set a password
n
activate power management features
n
update system hardware changes.
Accessing the SCU
From the DOS prompt, press
Ctrl-Alt-S
or
Fn-F9
to access the SCU. (Do not access the
utility from Windows.) A screen similar to the following appears.
Figure Section 2-11 SCU Main Menu
The Main Menu is made up of the following areas:
n
A menu bar at the top of the screen lists the menus.
n
The next block shows information about the SCU software, the current date, and
time.
Standard Preferences VGA Memory PowerMgmt Defaults Exit
SystemSoft SCU. Copyright 1983-1994 SystemSoft Corp.
06/07/1994 09:32:02
Memory Peripherals
Base Memory 640KB COM Port A COM1 (3F8h)
Extended Memory 3072KB Stick Pointer Enable
Shadow Memory 128KB LPT Port Address LPT1 (378h)
Reserved Memory 256KB Video Display VGA Display
Total Memory 4096KB Boot Speed Fast Clock
Coprocessor none
Drives
Diskette Drive A 1.44MB
Type Cyls Heads SPT LZONE Precomp Size
Hard Disk Auto
ESC to exit - F10 to save changes