NEC VERSA NOTE, Руководство пользователя

Страница: 111 / 159

Solving Problems 7-7
Product Recovery CD
If you determine that you need to restore your system to its initial
installation state follow the instructions given here.
Note:
Make sure the Fixed Disk Boot Sector is
not write protected in BIOS Setup.
In the Windows NT environment you can use the repair/emergency disk
to restore your system to its current state of operation without reverting
to its initial installation state. For details about creating the
repair/emergency disk, refer to the Windows NT documentation.
Note:
Only use the Recovery CD as a last
resort. Check the problem checklist at the beginning
of this chapter for information about solving
problems before using the CD. The recovery CD
provides a variety of options that either remove or
replace existing files. This may result in data loss.
The Product Recovery CD gives you the following choices.
„
Full — Completely rebuilds your hard disk drive, destroying all
existing data in the process. Once you choose this option, you are
prompted to confirm your choice. When your choice is confirmed, the
recovery proceeds without requiring any intervention or responses on
your part. Simply walk away and return in about half an hour.
Note:
Use full restore if your hard disk consists
of one partition (drive).
„
Partition — Lets you preserve your existing hard disk drive partition
structure and format only the primary partition without affecting the
extended partition(s).