NEC Versa LXi Series, Инструкция по обслуживанию и справочник

Страница: 54 / 95

3-10 Disassembly and Reassembly
Switch Settings
A six-position dip switch is located underneath the keyboard. The following list identifies each
switch setting and its function.
n
Switch 1, Password Override Switch — The default setting is “OFF.” If you forget your
password and cannot access the data on your NEC Versa, change the setting to “ON”
and your current password is erased.
n
Switch 2 — Keyboard select; Default is “ON” for U.S. 85 key keyboard.
n
Switch 3 — Reserved for factory use; Default is “ON.”
n
Switch 4 — Keyboard select; Default is “ON” for U.S. 85 key keyboard.
n
Switch 5 — BIOS flash enable; Default is “OFF” (disable). Before updating your BIOS,
change the setting to “ON.”
n
Switch 6 — Logo select; Default is “OFF” for U.S.
Default switch settings
Dip switches 2, 3, and 4 set to “On.”
Front Cover
Use the following procedure to remove the front cover from the system.
1.
Remove the keyboard and VersaBay III device.
2. Close the LCD panel and turn the system over.