2-10 System Configuration and Setup
If the system detects an error during POST, it prompts you with a double beep and a message:
“Press <F1> to resume.” If you press
F1
, the system enters BIOS Setup automatically. If you
want to fix the error, carefully read the error message that appears above the prompt (taking
notes if you want), and press
F2
. You will see this message if your CMOS battery becomes fully
discharged.
BIOS Setup Main Menu
After you press
F2
, the system displays the BIOS Setup Main Menu screen, similar to the
following.
BIOS Setup Main Menu
Use the up and down arrow keys (located on the lower right corner of the keyboard) to toggle
through the BIOS Setup menu items. Press
Enter
to activate a selection.
Looking at Screens
BIOS setup screens have three areas as shown next.
Advanced CMOS Setup
Содержание Versa LXi Series
