NEC Versa LXi Series Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 95

background image

1-12 System Overview

Internal Components

Review the following sections for a description of the system’s internal hardware.

Hard Disk Drive

A standard 2.5-inch, 9.5 mm or 12.7 mm hard disk drive ships with the system.

File Bay

The NEC Versa LXi ships with a 3.5-inch, 1.44 MB diskette drive or the SuperDisk drive
installed in the file bay.

VersaBay III

A 24X CD-ROM drive or a DVD-ROM drive comes installed in the NEC VersaBay III on the
front of the system.

CPU Board

The CPU board is a rectangular-shaped board located above the main board. The CPU board is
part of a subassembly, which includes a heat sink and the CPU board.

Audio Board

The audio board provides the NEC Versa system with its audio I/O capabilities via a line-in
jack, headphone and microphone jacks. It is situated on top of the main board.

Main Battery

The twelve-cell Lithium-Ion (Li-Ion) battery provides the main power source in your NEC
Versa LXi computer. See Chapter 9 for a list of battery specifications. In addition to this battery,
the CMOS battery and bridge battery also provide system power.

CMOS Battery

This lithium battery provides battery backup and prevents data loss in the system's
complementary metal oxide semiconductor (CMOS) RAM. This memory area contains
information on the system's configuration, for example, date, time, drives, and memory. The
CMOS battery charges when your NEC Versa is connected to AC power. The CMOS battery
may discharge completely if the NEC Versa notebook remains unused for an extended period of
time.

Bridge Battery

The bridge battery saves your system status in Suspend (Windows 95) or Standby (Windows 98)
mode, giving you time to install a fully charged battery or plug in AC power when your battery
charge becomes low.

Connect your NEC Versa system to AC power for a full 24 hours before

using it on battery power for the first time. Doing so insures that the bridge battery is fully charged
and that no data is lost during a battery change.

«
...
17
18
19
20
21
...
»

Содержание Versa LXi Series
































































































Отзывы:

Нет отзывов

Похожие инструкции для Versa LXi Series

Бренд: Acer Страницы: 59

ToughBook CF-72 Series

Бренд: Panasonic Страницы: 68

Touchbook CF-50 Series

Бренд: Panasonic Страницы: 56

Toughbook CF-T8EWATZJM

Бренд: Panasonic Страницы: 133

Toughbook CF-T8EWATZJM

Бренд: Panasonic Страницы: 40

Toughbook CF-31AGP7B2M

Бренд: Panasonic Страницы: 36

Toughbook CF-H1ADBAZCM

Бренд: Panasonic Страницы: 113

Бренд: EVGA Страницы: 15

Бренд: EUROCOM Страницы: 96

Бренд: IBM Страницы: 170

Бренд: Medion Страницы: 100

TravelMate P645-M

Бренд: Acer Страницы: 85

TravelMate C210 Series

Бренд: Acer Страницы: 97

TravelMate P243-MG

Бренд: Acer Страницы: 84

TravelMate B113-M

Бренд: Acer Страницы: 217

TravelMate P278-M

Бренд: Acer Страницы: 74

TravelMate C310 Series

Бренд: Acer Страницы: 69

Бренд: Krüger & Matz Страницы: 25

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды