NEC Versa LXi Series, Инструкция по обслуживанию и справочник

Страница: 37 / 95

System Configuration and Setup 2-17
Power Management Setup
Parameter Default
Setting Alternate Setting(s)
Panel Brightness Auto User Defined
Suspend Warning Tone Enabled Disabled
Remote Power On Disabled Enabled
Wake Up Alarm Disabled Enabled
Resume Alarm Time
2
Off Set time in 5 min. increments when
Wake Up Alarm is set.
Geyserville Optimized
Speed Disabled Performance/Battery/Reverse
Recommended
1
Available when power savings is set to Custom
.
2
Resume alarm time is selectable when wake up from suspend alarm is set
.
n
System Switch — Sets the Power button as a power switch or a sleep button.
n
Power Management Under AC — Specifies whether to enable power management
features when AC power is in use. When AC power is connected to your NEC Versa
system, power management is usually disabled. If you enable this parameter, the system
automatically activates the power management profile you set, even when AC power is
used.
n
Power Savings Level — Specifies one of four levels of power management.

High Performance — provides good battery life and best performance with only
minimal power conservation Use while on the road or travelling short distances.

Longest Life — provides best battery life, the maximum amount of power savings,
and good performance. Use while travelling long distances.

Off — disables power management and all device timeouts. Works well in an office
environment while powering your NEC Versa with AC power.

Custom — lets you define power management levels and specific device timeouts
according to your own needs and present environment. Custom lets you set the
following timeouts.