NEC VERSA FXI, Инструкция по обслуживанию и справочник

Страница: 35 / 101

2-16 System Configuration and Setup
„
Power Savings Level — Specifies one of four levels of power management. (Not
applicable in Windows 2000/98 with ACPI.)

High Performance — Provides good battery life and best performance with only
minimal power conservation. Use while on the road or traveling short distances.

Longest Life — Provides best battery life, the maximum amount of power savings,
and good performance. Use while traveling long distances.

Off — Disables power management and all device timeouts. Works well in an
office environment while powering your NEC Versa with AC power.

Custom — Lets you define power management levels and specific device timeouts
according to your own needs and present environment. Custom lets you set the
following timeouts.
Custom Timeout Options
Option Definition
CPU Speed Control Sets CPU performance at one of four levels.
Hard Disk Timeout Sets the time delay before your hard disk powers
down.
Video Timeout Sets the time delay before your video powers off.
Peripheral Timeout Sets the time delay before your peripherals are
controlled by power management.
Audio Device
Timeout Sets the time delay before your audio device powers
off.
Standby Timeout Selects the system standby timeout period.
Auto Suspend
Timeout Defines how much time elapses from the time the
system enters Standby mode to the time the system
automatically enters Suspend Mode.
„
LCD Suspend — Allows you to suspend/resume when the LCD panel is closed. (Not
applicable in Windows 2000/98 with ACPI.)
„
Suspend Option — Specifies either Suspend or Save to File (STF) as the default power
management mode.
„
Automatic STF — Enables the system, after 30 minutes in Suspend mode, to save the
current working environment to a special file on the hard disk and to power down the
system.
„
Panel Brightness — Selects the LCD screen brightness.
„
Suspend Warning Tone — Specifies whether the system warning tone sounds when
Suspend mode starts. It is best to keep this option enabled. (Not applicable in Windows
2000/98 with ACPI.)
„
Remote Power On — Allows the serial port modem or LAN board to wake the system
on a ring signal.
„
Wake Up from Suspend Alarm/Resume Alarm Time — Allows the alarm to resume the
system from suspend. Designates the time parameter in five minutes increments. (Not
applicable in Windows 2000/98 with ACPI.)