![background image](http://html.mh-extra.com/html/nec/versa-2400-service/versa-2400-service_user-manual_249084063.webp)
Using Setup and Power Management 3-11
Power Management Settings
The system arrives set up with many power-saving features
already enabled. You can change the timeout period for
these devices using Setup. See the following table.
Automatic Power-Saving Features
Device
Default
Timeout
Comment
Standby Timeout
2 minutes
System enters Standby mode after total
system inactivity.
Auto Suspend Timeout
2 minutes
This settings specifies how long the
system remains in Standby mode before
entering Suspend mode.
Hard Disk Timeout
2 minutes
Hard disk motor stops when hard disk is
not accessed for specified timeout.
Video Timeout
2 minutes
The video screen shuts off after the
timeout specified elapses.
NOTE
In Windows 95 systems, power management
settings under Windows override the settings estab-
lished in Setup. Make the Windows 95 power saving
settings match those in Setup for the best results.
Using Fn-Esc
Press the
Fn-Esc
to put the NEC Versa into Suspend mode
when you need to be away from your system for a short pe-
riod of time and want to return to where you left off. Press
the key combination again to bring the NEC Versa out of
Suspend mode.