3-6 About the Software
NEC Battery Gauge
You can use this utility to periodically check on your battery status. The
gauge shows you the percentage of power left in your Li-Ion battery.
System Backup
This utility allows you to back up to diskette the entire contents of your
system. You’ll need a large number of diskettes for this. This utility is used
on Windows for Workgroups only.
Auto Setup Utility
Auto Setup automatically configures your NEC Versa 2000 each time you
start it up. This utility also lets you change your system start-up settings.
Use Auto Setup as follows:
1.
Reboot your system. When the screen displays the blinking block at boot-
up, press
F1
.
2.
When the Auto Setup Summary screen is displayed, the enter the high-
lighted letter in the menu bar to that represents the category you want.
For example, type
D
to open the Disk Drive Settings window.
3.
Use the up and down arrows to move between selections displayed on the
screen. Press
Alt
+ the arrow keys to display setting options.
4.
Follow the instructions at the bottom of the screen to make selections,
change values, and exit.
NOTE
Be sure to keep track of any password you enter. If you set a
system password, a key icon appears at bootup. You must enter the
password to access the system. To change the password, enter the
password followed by a forward slash (/) and a new password. To
remove the password, enter the password followed by a forward
slash (/).
Refer to the online Advanced Topics for details on Auto Setup.
