2-6 Learning to Use the Hardware
Hard Disk
You can increase the system’s storage capacity by replacing the standard
hard disk, or you can have two hard drives for alternate usage (for example,
one for office use and one for home use). Here is how to replace the hard
disk:
1.
Check that the NEC Versa power is off.
2.
Open the hard disk drive cover, swing the lever down, and pull the drive
out of the compartment.
3.
Swing the lever on the new drive down to the side. Install the drive, slid-
ing it into the compartment. Press firmly to make sure the drive is fully
seated. Swing the drive lever up.
4.
Close the disk compartment cover.
5.
Run Auto Setup to check the new configuration. Auto Setup recognizes
the new drive if it’s a different size from the first drive.
Memory Expansion
Your NEC Versa 2000 comes standard with either 4 or 8 megabytes (MB)
of random access memory (RAM). You can increase system memory to a
maximum of 36 or 40 MB, respectively, by installing any one or two of the
following memory modules in the system.
■
4-MB memory card
■
8-MB memory card
Hard Disk
Drive
