NEC UM352W Скачать руководство пользователя страница 98

Страница: 98 / 151

5. Installation and Connections

Connecting to a Wireless LAN (Optional: NP05LM series)

The USB Wireless LAN Unit also provides a wireless LAN connection. To use a wireless LAN connection, you are
required to assign an IP address to the projector.

Important:

• If you use the projector with the USB Wireless LAN Unit in the area where the use of wireless LAN equipment is prohibited, remove

the USB Wireless LAN Unit from the projector.

• Buy the appropriate USB Wireless LAN Unit for your country or area.

NOTE:

• The green LED on the USB Wireless LAN Unit flashes to show that the USB Wireless LAN Unit is working.

• Your computer’s wireless LAN adapter (or unit) must be complied with Wi-Fi (IEEE802.11b/g/n) standard.

Attaching the USB Wireless LAN Unit

NOTE:

• The USB Wireless LAN Unit must be inserted into the USB Wireless LAN Unit port in the correct direction. It cannot be inserted

in the reverse direction. If the USB Wireless LAN Unit is inserted in the reverse direction with excessive force applied, the USB

port may break.

• Before touching the USB Wireless LAN Unit, touch a metallic object (such as a door knob or aluminum window frame) to discharge

the static electricity from your body.

• Always insert or remove the USB Wireless LAN unit when the main power is turned off. Failure to do so may cause projector

malfunction or damage to the USB wireless LAN unit. If the projector will not work correctly, turn off the projector, disconnect

the power cord, and then connect it again.

• Do not insert other USB devices into the USB Wireless LAN unit port. Do not insert the USB Wireless LAN unit into the USB (PC)

port (Type B).

NOTE:When the cable cover is attached, remove it before inserting the USB Wireless LAN Unit.

1. Press the POWER button to turn off the projector and set it

into standby condition, and disconnect the power cord.

2. Slowly insert the USB Wireless LAN Unit into the USB (WLAN)

port.

Remove the cap from the USB Wireless LAN Unit, and then insert

it with the surface (side of indicator) facing outward. Keep the cap
for later use.

NOTE: Do not force to insert the USB Wireless LAN Unit.

* To remove the USB Wireless LAN Unit, disconnect the power

cord and use the above procedure.

NOTE:

• The green LED on the USB Wireless LAN Unit flashes to show that Wireless

LAN Unit is working. If the USB Wireless LAN Unit is incorrectly attached,

the blue LED will not flash.

• Do not press the button on the USB Wireless LAN Unit. The button will not

work with this model.

Содержание UM352W
























































































































































Результаты поиска

Содержание UM352W

Отзывы:

Похожие инструкции для UM352W

Бренды по названию

Популярные бренды

NEC UM352W, Руководство пользователя

Результаты поиска

Содержание UM352W

Отзывы:

Похожие инструкции для UM352W

Бренды по названию

Популярные бренды