CHAPTER 12 SERIAL INTERFACE 20
User’s Manual U15075EJ2V1UD
239
(3) Cautions
related to UART mode
(a) When bit 7 (TXE20) of asynchronous serial interface mode register 20 (ASIM20) is cleared during
transmission, be sure to set transmission shift register 20 (TXS20) to FFH, then set TXE20 to 1 before
executing the next transmission.
(b) When bit 6 (RXE20) of asynchronous serial interface mode register 20 (ASIM20) is cleared during
reception, reception buffer register 20 (RXB20) and the receive completion interrupt (INTSR20) are as
follows.
Parity
RxD20 pin
RXB20
INTSR20
<3>
<1>
<2>
When RXE20 is set to 0 at a time indicated by
<1>
, RXB20 holds the previous data and INTSR20 is not
generated.
When RXE20 is set to 0 at a time indicated by
<2>
, RXB20 renews the data and INTSR20 is not generated.
When RXE20 is set to 0 at a time indicated by
<3>
, RXB20 renews the data and INTSR20 is generated.
Содержание U789436 Series
Страница 2: ...2 User s Manual U15075EJ2V1UD MEMO ...
Страница 7: ...User s Manual U15075EJ2V1UD 7 MEMO ...