NEC SV8300 Скачать руководство пользователя страница 98

Страница: 98 / 232

Chapter 4 Standard Mode

4-52

NWA-033628-001 Rev.1.0

[Upgrade] Category

STEP2:

Click the [Read] button.
Reading of the current schedule settings starts.

STEP3:

STEP3: Click the [OK] button.
The result of reading is displayed.

STEP4:

Click the cell of FTP Server Information for the unit number to be set.
A […] button appears.

No. Item

Description

(7) Continu-

ous Item
Entry

[FTP Server Infor-
mation] radio but-
ton

Select to enter FTP server information on unit number 01 in
(5) continuously.

[Upgrade Date]
radio button

Select to enter upgrade dates and times at fixed intervals
continuously starting from unit 01 in (5).

[Time] field

Enter the number of minutes at intervals of which the date
and time are upgraded.
• Entry range: 0 to 59 (default: 5)

[Change over
Date] radio button

Select to enter change over dates and time continuously
from unit 01 in (5).

[OK] button

[...] button

Содержание SV8300









































































































































































































































Результаты поиска

Содержание SV8300

Отзывы:

NEC SV8300, Руководство по программированию ПК, Страница: 98 / 232

Результаты поиска

Содержание SV8300

Отзывы: