NEC SV8300, Руководство по программированию ПК, Страница: 78 / 232

Chapter 4 Standard Mode
4-32
NWA-033628-001 Rev.1.0
[Implement] Category
No. Item Description
(2) System data
setup area (for
trunk blades) Port No. Displays the number of port that houses the trunk.
CKT No. field Displays the line number on the blade.
Trunk Num-
ber field Enter a trunk number associated with the port numbers with
three digits.
• 4 digits [“D” + 000 to 511, blank field] (default: blank
field)
Trunk Route
field Select a trunk route number according to the numbering
plan setting.
• 00 to 63 (default: 01)
(3) Trunk Blade No. field Select the trunk blade number.
• 000-127, NONE (No data) (default: NONE)
(4) [Apply] button Click to write the detailed data settings to the SV8300.
(5) [Cancel] button Click to return to the [Blade Configuration] screen without
writing the detailed data settings to the SV8300.
(6) [Fill In] button Click to apply the settings entered on the first line to other
lines as well.
Station number and Trunk number
Numbers are assigned in sequence starting from the one on
the first line.
* Numbers containing * or # cannot be set.
Automatic entry stops before the first digit of a station
number change (example: 3999).
• Trunk Route field
The same value as that appearing on line 1 is set.
• Route Kind field
The same value as that appearing on line 1 is set.
• Port No. and CKT No. fields
Out of the scope of continuous entry.
(7) [Clear] button Click to initialize the settings to their defaults.