NEC SV8300 Скачать руководство пользователя страница 103

Страница: 103 / 232

Chapter 4 Standard Mode

4-57

NWA-033628-001 Rev.1.0

[Upgrade] Category

STEP2:

Click the [Read] button:
The latest results are displayed.

No. Item

Description

(3)

Result
display
field

Unit No.

Displays the unit numbers registered with the SV8300.

Kind

Displays the type of the following results.
Change over/Automatic rollback/Upgrade/Version Match-
ing

Executive Date/
Time

Displays the date and time at which an event occurred.

Result

Displays the result of the event that occurred.
• Messages that may be displayed and their explanations.

Success : Program Upgrade has been succeeded
Canceled: Program Upgrade has been canceled
Start

: Program Upgrade has been started

Failure : FTP Server logon failure/missing files

(Failed to log on to the FTP server, or there
were no upgrade files on the server)

Failure : Data transfer error

(An error occurred transferring a file)

Failure : - (any other error)

Содержание SV8300









































































































































































































































Результаты поиска

Содержание SV8300

Отзывы:

NEC SV8300, Руководство по программированию ПК, Страница: 103 / 232

Результаты поиска

Содержание SV8300

Отзывы: