NEC SV8300, Руководство по программированию ПК, Страница: 219 / 232

Appendix C Troubleshooting
C-7
NWA-033628-001 Rev.1.0
Continued on next page
Error Message Cause Remedial action
The Trunk Number xx has
already been registered. – The specified trunk number is
already registered. Take either of
the following actions as appro-
priate:
1. Modify the trunk information.
2. Delete the trunk number once
and then register it again.
The Trunk Number xx is not reg-
istered. – Register a trunk number first.
The Station Number xx has
already been registered. – The specified extension number
is already registered. Take either
of the following actions as appro-
priate:
1. Modify the station number
information.
2. Delete the station number
once and then register it again.
The Station Number xx is not
registered. – Register an station number first.
First, read the data. – Read data before writing it.
Cannot start up because that the
file could not be found or was
broken.
Reinstall the SV8300 PCPro. – Reinstall SV8300 PCPro.
Cannot start up because the
desired file is used in the other
application. – Retry.
The file could not be found. – Specify a valid folder or browse
a valid file.
Failed to update the file. – Check to see if the file is not
read-only or if it is not used by
another application.