NEC SL1000, Руководство по функциям и спецификациям

Страница: 268 / 588

Program Number Program Name Default
47-12-08 InMail Answer Schedules – Schedule End Time Answer Table 1/ Schedule 1 =
1700 (5 : 00 PM)
All Other Schedules = 0000
47-13-01 InMail Dial Action Tables Refer to Programming Manual.
80-03-01 DTMF Tone Receiver Setup – Detect Level Type 1~5 = 0
80-04-01 Call Progress Tone Detector Setup – Detect Level Type 1 (DT) – 0 (-25dBm)
Type 2 (BT) – 0 (-25dBm)
Type 3 (RBT) – 0 (-25dBm)
Type 4, Type 5 – 0
Operation
Calling Your Mailbox
To call your mailbox:
With a multiline terminal, your Voice Mail key flashes green and your Message Center keys flash red
when they have messages waiting. If you do not have a Voice Mail key, your Message Waiting LED
flashes instead.
Multiline Terminal
1. Press your Voice Mail key (Program 15-07 or SC 851 : 01 +
*
8).
- OR -
Your mailbox number is normally the same as your extension number. You may optionally dial a co-
worker’s mailbox - or use this procedure to call your mailbox from a co-worker’s telephone.
- OR -
Press Speaker and dial
*
8.
2. If requested by Voice Mail, enter your security code.
Ask your Voice Mail system administrator for your security code.
Normally, your Message Waiting (MW) LED goes out (if applicable). If it continues to flash, you have
unanswered Message Waiting requests or a new General Message. See “To check your messages” below.
Single Line Telephone
1. Lift the handset and dial
*
8..
If you are at a co-worker’s telephone, you can dial the Voice Mail master number and your mailbox num-
ber instead. You can also use this procedure from your own telephone to call a co-worker’s mailbox.
2. If requested by Voice Mail, enter your security code.
Checking Messages
1. Press the Voice Mail key once.
The voice mail is called.
When there are new messages, the Message Waiting LED on the telephone flashes red.
With this option set, the MSG key can be used as a Voice Mail key for any function [calling voice mail or
transfer call a to voice mail (Hold + MSG + Extension Number), etc.].
Leaving A Message (multiline terminal Only)
To leave a message in the mailbox of an unanswered extension (the extension you call can be
busy, in DND or unanswered):
ISSUE 1.0 SL1000
I
InMail 1-260