E – 21
1
ON
DI
P
2
3
4
5
6
POWER
STATUS
ON/STAND BY
MENU
E
N
TE
R
CAN
CE
L
SELECT
AUTO ADJUST
RGB
VIDEO
S-VIDEO
RGB INPUT
FRONT/
REAR
AUDIO
AUDIO
L / MONO
R
S-VIDEO
VIDEO
REA
R
RG
B IN
PU
T
FR
ON
T/
AU
DIO
S-V
IDE
O
RGB INPUT
AUDIO
Connecting Your PC or Macintosh Computer
IBM VGA or Compatibles (Notebook type)
or Macintosh (Notebook type)
IBM VGA or Compatibles
(Desktop type)
Macintosh (Desktop type)
Audio cable
(commercially available)
For older Macintosh,
use a commercially
available pin
adapter to connect to
your Mac's video port.
Pin adapter for Macintosh
(not supplied)
NOTE: The new Macintosh computer such as G3 will
have the 15 pin HD connector. The RT50X "Plug and
Play" data will be downloaded to the Macintosh.
Therefore, a Mac adapter will not be necessary.
Connecting your PC to your RT50X rear projection display will enable you to view your computer’s screen image for an impressive presentation.
To connect to a PC or Macintosh computer, simply:
1. Turn off the power to your rear projection display and computer.
2. Use the supplied signal cable to connect your PC or Macintosh computer to the rear projection display.
3. Turn on the rear projection display and the computer.
4. If the rear projection display goes blank after a period of inactivity, it may be caused by a screen saver installed on the computer you’ve connected
to the rear projection display.
Push to select the
front terminal.
RGB signal cable (supplied)
It is recommended that you use a commercially available
distribution amplifier if connecting a signal cable longer
than the supplied one.
