Installing Options 3-39
NOTE
If the 5 1/4-inch device comes with drive
rails, do not attach them. Remove any rails already
attached. See the documentation that comes with
the device.
4.
From the front of the system, insert the device, connector
end first, into the device slot.
NOTE
To easily access device connectors for
cabling, do not insert a 5 1/4-inch device all the way
into the slot.
5.
Connect the device cables.
6.
Align the holes in the device with the holes in the cage.
7.
Secure the device to the cage with the four screws, two
to a side, that come with the device. See the following
figure.
