Using Voyetra Sound Software 6-5
Recording Digital Audio Files
To record .WAV files, use the following procedures.
1.
Connect your audio source (microphone, CD player,
tape deck) to the input jack at the back of the system.
2.
From the Mixer module, select your input source and set
the recording volume.
3.
Click on the record button. This will but the WAV
Player in Record Standby mode (the red light blinks).
4.
Click on the Play button to start recording. The blinking
red light becomes a steady red light indicating that WAV
Player is recording.
5.
Speak into the microphone or play the input source to
record.
6.
When you finish recording, click the Stop button to stop
recording.
7.
Click the Play button to hear what you just recorded. If
it is satisfactory, choose Save from the File menu.
8.
Type a new filename in the dialog box and choose OK.
Playing Digital Audio Files
Use the following procedure to load and play digital audio
files.
1.
To play a .WAV or .VOC digital audio file you must
first insert the files you wish to hear in the playlist.
2.
Once you have created a playlist, press OK to close the
playlist.
3.
Click the Play button to hear the files in the playlist.
The digital audio file plays and stops when it reaches the
end.
