3-36 Installing Options
3 1/2-Inch Drive Installation
Use the following procedure to install a hard disk drive into
the drive bracket.
1.
Remove the system unit cover.
2.
Remove the 3 1/2-inch drive bracket from the system
unit (see “Removing the 3 1/2-Inch Drive Bracket”).
3.
Follow the preinstallation instructions that come with the
device, such as setting jumpers and switches.
4.
Insert the hard disk drive so that the connectors extend
out of the bracket on the same end as the standard
diskette drive connectors.
5.
Align the holes in the hard disk drive with the holes in
the bracket.
6.
Secure the device to the bracket with the four screws,
two to a side, that come with the device.
Securing a 3 1/2-inch drive
