4-22 Setting System Parameters
THE BOOT MENU
Selecting “Boot” from the menu bar displays the following
list of boot devices:
Diskette Drive
CD-ROM reader
Hard Drive
THE EXIT MENU
Selecting “Exit” from the menu bar displays the following
exit options. Note that
Esc
does not exit this menu. You
must select one of the items from the menu or menu bar to
exit.
Save Changes & Exit
Discard Changes & Exit
Get Default Values
Load Previous Values
Save Changes.
Save Changes & Exit
After making your selections on the Setup menus, always
select Save Changes to Non-Volatile RAM (NVRAM) to
make them operative.
Unlike standard RAM memory, NVRAM is sustained by a
real-time clock chip and stays on after you turn your system
off.
After you save your selections, the program displays this
message:
Values have been saved to CMOS!
Continue
If you attempt to exit without saving, the program asks if
you want to save before exiting.
