72 Solve problems
Speaker problems
No sound from the speakers
Check that the speaker cable is tightly connected to the line
out jack at the rear of the system.
If you have the NEC CS500 monitor, adjust the sound
through the On-Screen Display controls. See the
documentation that comes with the monitor.
If you have stand-alone speakers, adjust the volume control
on the speaker set.
Adjust the volume control through your sound software.
Speaker volume is too low
Adjust the volume control on your speaker set, through sound
software, or if you have the NEC CS500 monitor, through the
On-Screen Display controls.
Sound is only coming from one speaker
Balance the speaker output by adjusting the balance in the
sound software (see the sound software help).
Microphone problems
You get no response from the microphone.
Check that the microphone cable connector is tightly
connected to the microphone jack on your computer.
Microphone response is weak.
Adjust the microphone level through your sound software.
Содержание PowerMate Ready ES Pro
Страница 105: ...Index 4 X X2 technology 39 40 ...