Configuring the System 3-27
The drivers and other software components required for
the operating system are also loaded from the CD.
After the OS finishes loading, the “Operating System
Restore Completed” screen appears.
6.
Remove the CD from the CD tray.
7.
Click
OK
to reboot.
This completes the Auto Rebuild and Restore procedure.
To reinstall any of the applications or online documents, or to
install device drivers that did not come with your system,
follow the procedures in “NEC Select Install CD.”
Restore any application or driver that was not provided by
NEC by using the vendor diskette(s) or CD-ROM(s) included
in its original packaging.
Custom Rebuild and Restore
To perform a custom OS Restore with choices on
repartitioning and/or reformatting the hard drive, boot the
system from the NEC OS Restore CD. When the system
boots from the CD, it automatically loads the MS-DOS-based
Operating System Restore program.
!
CAUTION
The OS Restore program deletes all the data on
your hard drive. If possible, back up your data
before performing an OS restore.
