4-28 Installing Options
Installing an Upgrade Processor
Install a processor by following these steps:
1.
If you are adding a second processor to a system running
the Windows NT operating system, remove the
termination board from the second processor socket. See
“Removing a Termination Board.”
If you are replacing the processor currently in your
system, remove the processor (see “Removing the
Processor”).
!
CAUTION
Before picking up the processor, reduce static
discharge by touching the metal chassis of the
system unit.
2.
Remove the new processor from its antistatic package and
place it on a grounded, static-free surface or conductive
foam pad.
3.
Place the thermal pad on top of the processor so that the
holes in the thermal pad line up with the holes in the
processor.
