Installing Options 4-17
Removing a DIMM
If your memory configuration requires the removal of a
module, perform the following steps:
!
CAUTION
Before opening the computer and before
handling boards or memory modules, reduce
static discharge by touching the system’s metal
chassis.
1.
Remove the system unit cover (see “Removing the Side
Covers”).
2.
Locate the system memory upgrade sockets on the system
board (see “System Board Options”). Any socket (or all)
can contain a DIMM memory module.
3.
Label and disconnect any cables that block the DIMM
sockets.
4.
Press the plastic clips at the outer edges of the socket
away from the memory module. This ejects the DIMM
from the socket.
