manualshive.com logo in svg

NEC POWERMATE ENTERPRISE - 10-1997, Руководство пользователя

Поделиться
Скачать
NEC POWERMATE ENTERPRISE - 10-1997 Скачать руководство пользователя страница 84

    

 NECCSD Tools and Utilities   4-7

 If you add an optional diskette drive to your system, select
“Floppy B” and select the appropriate parameter value for
the drive.

 The Floppy Write Protect field allows you to configure the
floppy diskette drive(s) so that no information can be
written to a diskette. Set the field to “Enabled” to write
protect diskettes.

Primary and Secondary IDE

 The Primary and Secondary IDE Master and Slave settings
control the following types of devices:

„

hard disk drives

„

CD-ROM drives

„

ATAPI compliant removable devices.

 Your computer comes with the hard disk drive (drive C:)
configured as the “Primary IDE Master.” The system can
support up to four physical IDE drives (two on each
PCI/IDE connector). Choices include:

„

Primary Master

„

Primary Slave

„

Secondary Master

„

Secondary Slave.

 The default setting for existing installed Master devices is
“Auto,” meaning that the system automatically detects the
hard disk type and sets the remaining parameters. The
default setting for existing installed Slave devices is
“None.”

Содержание POWERMATE ENTERPRISE - 10-1997















































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды