manualshive.com logo in svg

NEC POWERMATE ENTERPRISE - 10-1997, Руководство пользователя

Поделиться
Скачать
NEC POWERMATE ENTERPRISE - 10-1997 Скачать руководство пользователя страница 136

    

 5-16   Installing Options

Replacing the Stand

 To replace the minitower stand, use the following steps.

1. 

Place the system unit over the stand with its front edge
about 1/2 inch from the front of the stand. Align the tabs
on the stand with the slots on the floor of the chassis.

 

!

WARNING

 To prevent tipping, always place the system unit
back in its stand after completing a system upgrade.

2. 

Slide the system unit forward to lock the tabs in the
slots.

3. 

Replace the system unit cover (see “Replacing the
Minitower Cover”).

EXPANSION BOARDS

 Your system supports industry standard architecture
(ISA) 8- and 16-bit expansion boards (Plug and Play and
non-Plug and Play). It also supports 32-bit Peripheral
Component Interconnect (PCI) expansion boards, which are
Plug and Play.

 With Plug and Play expansion boards, you can install a
board in an expansion slot without changing the hardware
settings. There are no system resource conflicts to resolve.
Plug and Play automatically configures the board for the
system.

Содержание POWERMATE ENTERPRISE - 10-1997















































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды