NEC PowerMate 2000 Series, Инструкция по обслуживанию и справочник, Страница: 54 / 175

System Configuration 2-29
Restore any application or driver that was not provided by NEC by using the
vendor diskette(s) or CD-ROM(s) included in its original packaging.
Fixing the Operating System
Follow these steps to restore the operating system (Windows 98 and
Windows 2000 only) to a state for retrieving and backing up data without
repartitioning or reformatting the hard drive. Once all data is backed up, perform
another NEC OS Restore using the
Auto
or
Custom
mode.
The Auto and OS Restore programs delete all the data on
the hard drive. If possible, back up all data before performing
an OS restore with these options.
1.
Launch the NEC OS Restore CD and follow the prompts to get to the
Restore Mode screen (see “Launching the OS Restore CD”).
2.
Click Fix OS to do a basic operating system restore. The Fix OS screen
appears and displays two options (Back and Continue).
3. Click
Continue
. The Installing Applications screen appears, showing the
status of the restore. It also displays the version of Windows OS being
installed. The installation can take from 5 to 10 minutes.
Note
:
The drivers and other software components
required for the operating system are also loaded from the
CD.
After the OS finishes loading, the “Operating System Restore Completed”
screen appears.
4. Remove the CD from the CD tray.
5. Click
OK
to reboot.
This completes the OS Restore (or “Fix OS”) procedure. The system is now in a
state where data can be backed up. System settings previously located in the
C:\WINDOWS directory are now in a backup directory C:\WINDOWS.ORG.
Some or all applications might not exhibit full functionality
after the Fix OS is performed. To restore the system to its
factory-installed state, perform another OS Restore using
the Auto or Custom option.