NEC PowerMate 2000 Series, Инструкция по обслуживанию и справочник, Страница: 36 / 175

System Configuration 2-11
Main Menu Items
Menu Item Settings (default is bold)
LBA Format (label field
only)
Total Sectors xxxxxxxx total sectors
Maximum Capacity xxxx MB
Multi-Sector Transfers Disabled, 2, 4, 8, 16 sectors
Determines the number of sectors per block for multi-sector
transfers.
When Type is Auto, value in Multi-Sector Transfers field is
auto-detected and field is read only.
LBA Mode Control
Enabled, Disabled
When Enabled is selected, it causes logical block addressing
to be used in place of cylinders, heads, and sectors.
When Type is set to Auto, the value in the LBA Mode field is
auto-detected and the field is read only.
32-Bit I/O
Disabled, Enabled
When Enabled, allows 32 bit data transfers.
Transfer Mode Standard, Fast PIO1, Fast PIO2, Fast PIO3, Fast PIO4, Fast
PIO3/DMA1, Fast PIO4/DMA2
Selects the method for moving data to and from the drive.
When Type is set to Auto, the value in the field is auto-
detected and the field is read only.
Ultra DMA Mode Disabled, Mode 0, Mode 1, Mode 2, Mode 3, Mode 4
Selects the Ultra DMA Mode for moving data to and from the
drive. Autotype the drive to select the optimum transfer mode.
When Type is set to Auto, the value in the field is auto-
detected and the field is read only.
Keyboard Features Press Enter to check or change keyboard parameters.
Numlock Auto, On, Off
Selects the power-on state for Num Lock.
Key Click Disabled, Enabled
Enables or disables key click.
Keyboard auto-repeat
rate
30/sec, 26.7/sec, 21.8/sec, 18.5/sec, 13.3/sec, 10/sec, 6/sec,
2/sec
Selects key repeat rate.
Keyboard auto-repeat
delay
1/4 sec, 1/2 sec, 3/4 sec, 1 sec
Selects delay before key repeat.