NEC PowerMate 2000 Series, Инструкция по обслуживанию и справочник, Страница: 39 / 175

2-14 System Configuration
Advanced Menu
Menu Item Settings (default is bold)
I/O Device Configuration Press Enter to access the following submenus.
Serial Port A Disabled, Enabled, Auto
Setting at Enabled allows the user to configure the port.
Setting at Auto enables the BIOS or operating system to
configure the port.
Base I/O
Address
3F8, 2F8, 3E8, 2E8
Selects the base I/O address for serial port A.
Interrupt
IRQ3, IRQ4
Selects the IRQ for serial port A.
Parallel Port
Disabled, Enabled, Auto
Setting at Enabled allows the user to configure the port.
Setting at Auto enables the BIOS or operating system to
configure the port.
Mode Output Only, Bi-directional, EPP, ECP
Selects parallel port mode.
Base I/O
Address
378, 278, 3BC
Selects the base I/O address for the LPT port.
Interrupt
IRQ5, IRQ7
Selects the IRQ for the LPT port.
Floppy Disk Controller
Disabled, Enabled, Auto
Setting at Enabled allows the user to configure the controller.
Setting at Auto enables the BIOS or operating system to
configure the controller.
Base I/O
Address
Primary, Secondary
Sets the base I/O address for the controller.
Large Disk Access Mode Other, DOS
Select DOS if using DOS operating system.
Select Other if using another operating system such as UNIX
or Novell NetWare.
Local Bus IDE Adapter
Disabled, Primary, Secondary, Both
Enables the integrated local bus IDE adapter.