5
PART NAMES AND FUNCTIONS
Control panel on the rear
11.
POWER Button
Turns the projector on or off when the projector is
in the standby condition (Main Power switch on
and Standby indicator lit).
12.
CONTROL Button
Used with other buttons. similar to a shift key on a
typewriter or computer. This is the same with the
CTL button on the remote control.
13.
OPERATE Button
Press to display the OPERATE menu. You can
select the following adjustment functions from this
menu.
1/PICTURE 4/INPUT SELECT
2/POSITION 5/SOURCE INFO
3/SOUND 6/STATIC
NOTE:
The SOUND item is not included in the
“OPERATE” menu on the stand alone mode.
14.
ENTER Button
Executes menu selection and switches to selected
input.
15.
END Button
Exits t adjustment mode.
16.
DOWN Button
Used to decrease the selected adjustment level or
move the cursor downward. When used with the
CONTROL button, the DOWN button works as
the CURSOR < button on the remote control unit.
17.
UP Button
Used to increase the selected adjustment level or
move the cursor upward. When used with the
CONTROL button, the UP button works as the
CURSOR > button on the remote control unit.
18.
NORMAL/LOAD Button
Returns the adjustment data to the standard level
(NORMAL function).
Pressing this button with holding down the
CONTROL button returns the adjustment data to
the last stored level (LOAD function).
19.
Select Counter
Displays "00" in normal operation.
20.
REMOTE Indicator
Flashes when the projector receives a signal from
the remote control.
21.
STANDBY Indicator
Lights up when the projector's main POWER
switch is on. Flashes when the projector might not
be connected with the Switcher correctly or when
the Switcher might be turned off.
22.
POWER Indicator
Lights up when the projector is turned on.
23.
Remote Sensor
Receives the signal from the supplied remote
control when used in the wireless condition.
