4
PART NAMES AND FUNCTIONS
1.
POWER Switch (Main power)
Press to turn the main power on. The STANDBY
indicator is lit.
In this condition you can start up the projector by
pressing the POWER ON button on the remote
control or the POWER button on the rear panel.
Press again to turn the main power off.
NOTE:
When turning off the main power, first
return the projector to the standby condition by
pressing the POWER OFF button on the remote
control or the POWER button on the rear panel
and then turn off the main POWER switch. These
procedures are to protect your projector and the
connected equipment.
2.
AC INPUT
Connect the supplied power cord here.
3.
REMOTE 2 Jack
When the supplied full function remote control is
used in the wired condition connect the supplied
remote cable here. The wireless control does not
work when the plug of the remote cable is inserted
here.
4.
RGB H/V and V Input Terminals
Connect R, G, B, H (Horizontal sync) and V
(Vertical sync) outputs of the external equipment
(such as the Switcher). If using a component with
a combined sync (SYNC) output, connect it to the
H/V terminal.
5.
Remote Sensor
Receives the signal from the supplied remote
control when used in the wireless condition.
6.
REMOTE 1 Terminal
This terminal allows external control of the
projector from either the Switcher or from an
external control. When the Switcher is used,
connect to the REMOTE 1 terminal on the back of
the Switcher.
NOTE:
Only the ISS-6010/ISS-6010G is
compatible with this projector.
7.
OPTION 1 Input Terminal
For future system expansion.
8.
S-VIDEO Input Terminal
Connect to the S-video output of the external
equipment such as VCR with an S-video output.
9.
VIDEO Input Terminal
Connect to the video output of the external
equipment such as video equipment.
10.
S-VIDEO/ VIDEO Select Switch
Selects either the S-VIDEO input or the VIDEO
input terminal.
Terminal panel
on the front
