20
BASIC OPERATION
Adjust for the red and blue CRTs to place their pattern on top of
the green test pattern (center only).
NOTE:
The static convergence adjustment should be per-
formed for R and B CRT. Carry out the adjustment after dis-
playing a motion picture for 20 minutes or more.
Proceed as follows:
1.
Press the OPERATE button.
•
The “OPERATE” menu will be displayed.
2.
Use the CURSOR
p
or
q
button to highlight the "6/
STATIC” line and then press the ENTER button to display
the STATIC adjustment screen. You can also select the
STATIC adjustment screen directly by pressing the INPUT
"6" button.
NOTE:
The “STATIC” adjustment can also be displayed by
pressing the STATIC button on the full function remote con-
trol.
3.
Press the R or B button to display the pattern to be aligned
with the Green pattern (as used a reference color).
•
You can turn on or off each CRT beam (R and B) separately.
4.
Hold down the CTL button then select the CRT you wish to
adjust with the R and B buttons.
5.
Align the center of the Red or the Blue pattern with the center
of the Green pattern using the CURSOR buttons.
•
The CURSOR
t
or
u
button moves the pattern right or left.
The CURSOR
p
or
q
button moves the pattern up or down.
6.
Repeat steps 3 to 5 for the other CRTs if necessary.
7.
To end this adjustment, press the END button to display the
“STORE ?" menu.
•
Whenever the END button is pressed, the screen will be changed
in this order:
“OPERATE” menu “STORE?” menu
Static Convergence Adjustment
– O P E R A T E –
1 / PICTURE
2 / POSITION
3 / SOUND
4 / INPUT SELECT
5 / SOURCE INFO
6 / STATIC
C O N V E R G E N C E
–
S T A T I C –
CRT - R -
H +10%
q
V
p
p
-10%
