manualshive.com logo in svg

NEC PD789488, Руководство пользователя

Представляем вам NEC PD789488 - качественная и надежная продукция для вашего удобства. Здесь вы можете бесплатно скачать пользовательское руководство, чтобы научиться пользоваться всеми возможностями этого устройства. Посетите {вебсайт} и загрузите свой экземпляр сейчас.

Поделиться
Скачать
background image

 

 

User’s Manual  U15331EJ4V1UD

 5 

 
 
 
 
 
 
 
 
 
 
 

The information in this document is current as of July, 2005.  The  information is subject to change 
without notice.  For actual design-in, refer to the latest publications of NEC Electronics data sheets or 
data books, etc., for the most up-to-date specifications of NEC Electronics products.  Not all 
products and/or types are available in every country.  Please check with an NEC Electronics sales 
representative for availability and additional information.
No part of this document may be copied or reproduced in any form or by any means without the prior       
written  consent of NEC Electronics.  NEC Electronics assumes no responsibility for any errors that may 
appear in this document.
NEC  Electronics  does not assume any liability for infringement of patents, copyrights or other intellectual 
property rights of third parties by or arising from the use of NEC Electronics products listed in this document 
or any other liability arising from the use of such products.  No license, express, implied or otherwise, is 
granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others.
Descriptions of circuits, software and other related information in this document are provided for illustrative 
purposes in semiconductor product operation and application examples. The incorporation of these 
circuits,  software and information in the design of a customer's equipment shall be done under the full 
responsibility of the customer. NEC  Electronics  assumes no responsibility for any losses incurred by 
customers or third parties arising from the use of these circuits, software and information.
While NEC Electronics  endeavors to enhance the quality, reliability and safety of NEC Electronics  products, 
customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely.  To 
minimize risks of damage to property or injury (including death) to persons arising from defects in NEC 
Electronics products, customers must incorporate sufficient safety measures in their design, such as 
redundancy, fire-containment and anti-failure features.
NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and 
"Specific".  
The "Specific" quality grade applies only to NEC Electronics products developed based on a customer-
designated "quality assurance program" for a specific application.  The recommended applications of an NEC 
Electronics product depend on its quality grade, as indicated below.  Customers must check the quality grade of 
each NEC Electronics product before using it in a particular application. 

The quality grade of NEC Electronics  products is "Standard" unless otherwise expressly specified in NEC 
Electronics data sheets or data books, etc.  If customers wish to use NEC Electronics products in applications 
not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to 
determine NEC Electronics' willingness to support a given application.

(Note)

•

•

•

•

•

•

M8E  02. 11-1

(1)

(2)

"NEC  Electronics" as used in this statement means NEC Electronics  Corporation and also includes its 
majority-owned subsidiaries.
"NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as 
defined above).

Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots.
Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support).
Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.

"Standard":

"Special":

"Specific":

 

Содержание PD789488





































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для PD789488

D-Link ShareCenter DNS-320L Datasheet preview
ShareCenter DNS-320L
Бренд: D-Link Страницы: 4
National Instruments SCXI-1121 User Manual preview
SCXI-1121
Бренд: National Instruments Страницы: 162
Teagle Tomahawk 7100 Operator'S Manual preview
Tomahawk 7100
Бренд: Teagle Страницы: 40
mikroElektronika CAN SPI click Quick Start Manual preview
CAN SPI click
Бренд: mikroElektronika Страницы: 3
GAMDIAS Aura GC2 Quick Installation Manual preview
Aura GC2
Бренд: GAMDIAS Страницы: 15
FOR-A USF-105AS Operation Manual preview
USF-105AS
Бренд: FOR-A Страницы: 39
Cypress Semiconductor CY7C1019D Specification Sheet preview
CY7C1019D
Бренд: Cypress Semiconductor Страницы: 11
IEI Technology PUZZLE-IN003B User Manual preview
PUZZLE-IN003B
Бренд: IEI Technology Страницы: 86
Dahua Technology Lite N42B1P Series Quick Start Manual preview
Lite N42B1P Series
Бренд: Dahua Technology Страницы: 14
Cytron Technologies SHIELD-2AMOTOR User Manual preview
SHIELD-2AMOTOR
Бренд: Cytron Technologies Страницы: 13
ETL TeleCLIENT TC7730 Series User Manual preview
TeleCLIENT TC7730 Series
Бренд: ETL Страницы: 83
Promise Technology FastTrak TX4000 User Manual preview
FastTrak TX4000
Бренд: Promise Technology Страницы: 76
S&T Kontron SMARC-sXEL User Manual preview
Kontron SMARC-sXEL
Бренд: S&T Страницы: 108
Supero AOC-1UIPMI-B User Manual preview
AOC-1UIPMI-B
Бренд: Supero Страницы: 53
Mitsubishi M16C/20 Series Software Manual preview
M16C/20 Series
Бренд: Mitsubishi Страницы: 188
ELSA GLoria-L User Manual preview
GLoria-L
Бренд: ELSA Страницы: 60
Helmholz 700-160-3EN02 Quick Start Manual preview
700-160-3EN02
Бренд: Helmholz Страницы: 14
Paradyne SLV Installation Instructions Manual preview
SLV
Бренд: Paradyne Страницы: 28

Бренды по названию

Популярные бренды

Загрузить еще бренды