NEC NP901W, Руководство пользователя

Страница: 106 / 166

92
6. Using On-Screen Menu
4. Select [OK] and press the ENTER button.
this will complete the settings.
You will be returned to the [PrOgraM list] screen.
NOTE:
• Up to 30 different timer settings can be programmed.
• When [PROGRAM TIMER] is turned on, the [STANDBY MODE] setting is ignored.
• The Program Timer is executed on a set time basis, not in a program basis.
• Once the program not marked with a check in [REPEAT] has been executed, the check mark in the [ACTIVE] check box will be
cleared automatically and the program will be disabled.
• When the on-time and the off-time set for the same time, the off-time setting will take preference.
• Two different sources are set for the same time, the larger program number will take preference.
• The on-time setting will not be executed while the cooling fans are running or an error is occurring.
• If the off-time setting is expired under the condition in which the power off is not possible, the off-timer setting will not be ex-
ecuted until the power off becomes possible.
• Programs not marked with a check mark in [ACTIVE] of the [EDIT] screen will not be executed even if the Program Timer is en-
abled.
• When the projector is turned on by using the program timer and if you want to turn off the projector, set the off-time or do it
manually so as not to leave the projector on for a long period of time.
Activating the program timer
1. Select [ON] on the [PROGRAM TIMER] screen and press the ENTER button.
the [On] will be activated.
2. Press the EXIT button.
the [PrOgraM tiMer] screen will be changed to the [tOOl] screen.
NOTE:
• Selecting [OFF] will disable the Program Timer even when a program is marked with a check mark on [PROGRAM LIST] screen.
• When the [ON] is turned on, the [PROGRAM LIST] cannot be edited. To edit the programs, select [OFF] to turn off the Program
Timer.
Changing the programmed settings
1. On the [PROGRAM LIST] screen, select a program you want to edit and press the ENTER button.
2. Change the settings on the [EDIT] screen.
3. Select [OK] and press the ENTER button.
the programmed settings will be changed.
You will be returned to the [PrOgraM list] screen.
Changing the order of programs
1. On the [PROGRAM LIST] screen, select a program whose order you want to change and press the SE-
LECT  button.
2. Press the SELECT

button to select

or

.
3. Press the ENTER button a few times to select a row to which you wish to move the program.
the order of the programs will be changed.