NEC NP901W, Руководство пользователя

Страница: 99 / 166

85
6. Using On-Screen Menu
Selecting Resolution [RESOLUTION]
[AUTO] : Displays an RGB signal to fit the screen in the projector’s native resolution (NP905: 1024 x 768 pixels/
NP901W: 1280 x 800 pixels).
[NATIVE] : Displays an RGB signal in its true resolution.
Example: When a source with 800 x 600 pixels is selected using the NP905/NP901W:
NP905 NP901W
1024
1066 1280
768
800
800
1024
768
600
800
600
800
• When [NATIVE] is selected, [OVERSCAN] and [ASPECT] are not available.
• [RESOLUTION] is not available under the following conditions:
- When [SCREEN TYPE] is set for the resolution other than the projector’s native resolution.
- When a signal other than RGB is selected.
- When a signal with a higher resolution than the projector’s native resolution is displayed.
[VIDEO]
Using Noise Reduction [NOISE REDUCTION]
This function is used to reduce video noise.
RANDOM NR ......... Reduces flickering random noise in an image.
MOSQUITO NR ...... Reduces mosquito noise that appears around the edges of an image during DVD playback.
BLOCK NR ............. Reduces block noise or mosaic-like patterns by selecting ON.
Selecting Interlaced Progressive Conversion Process Mode [DEINTERLACE]
This function allows you to select an interlaced-to-progressive conversion process for video signals.
AUTO ..................... Determines an appropriate interlaced-to-progressive conversion process automatically.
VIDEO .................... Applies a normal interlaced-to-progressive conversion process.
FILM ...................... Applies the automatic detection mode for telecine signals. This option is recommended for a
movie pic-
ture.
NOTE: This function is not available with RGB signals.
[NATIVE] [AUTO] [NATIVE] [AUTO]