NEC NP-NC900C-A, Руководство по обслуживанию

Страница: 18 / 199

4-8
TROUBLESHOOTING
“Confidential, Do Not Duplicate without written authorization from NEC.”
[1] Detect rule:
Error Code Message – Troubleshooting and what parts need to replace
ErrMsgOverTempInlet
When Inlet temp > 45 in stand by mode or
Force ECO mode toggle and Inlet temp > 43 continue 5 mins
Temp. is over spec. Check if there is anything blocks in inlet or replace Inlet thermal sensor.
ErrMsgOverTempDMD
When DMD temp > 70 in stand by mode or
Force ECO mode toggle and DMD temp > 70 continue 5 mins
Temp. is over spec. Check or replace DMD thermal sensor.
ErrMsgOverTempLamp
Thermal Break toggle and Polling time is 500ms.
Check or replace Lamp thermal break.
ErrMsgOverTempBallast1
When Blaster temp > 90 in stand by mode or
Force ECO mode toggle and Blaster temp > 90 continue 5 mins
Check or replace Ballast1 thermal break.
Byte 6 Definition Byte 7 Definition
Bit 0 ErrMsgFan9DriverError Bit 0 ErrMsgNotchFilterOpen [5]
Bit 1 ErrMsgFan10DriverError Bit 1 Reserved
Bit 2 ErrMsgFan11DriverError Bit 2 Reserved
Bit 3 ErrMsgFan12DriverError Bit 3 Reserved
Bit 4 ErrMsgFan13DriverError Bit 4 Reserved
Bit 5 ErrMsgFan14DriverError Bit 5 Reserved
Bit 6 ErrMsgFan15DriverError Bit 6 Reserved
Bit 7 ErrMsgFan16DriverError Bit 7 Reserved