NEC NP-LV01BD, Руководство пользователя

Страница: 38 / 173

21
2. Projecting an Image (Basic Operation)
❹
Turning on the Projector
Please contact your dealer/distributor to connect the power cable.
Preparation:
• Connect the power cable to the projector. (
→
page 17 )
• Supply AC power to the projector.
NOTE:
• Turn off the projector power switch and light power switch to the projector when supplying or cutting AC power to the projector.
Supplying or shutting down the AC power while the projector power switch and light power switch is on will damage the projector.
• Turning on and off the projector involves a two-step operation; the “projector power switch and light power switch” and the
“POWER button” (POWER ON and OFF on the remote control).
Turning power on. (See this page)
1. Turn on the “projector power switch and light power switch” of the projector.
Your projector is set in a standby state.
2. Press the (POWER) button on the projector cabinet or the POWER ON button on the remote control.
Your projector is turn on.
Turning power off. ( → page 34 )
1. Press the (POWER) button on the projector cabinet or the POWER OFF button on the remote control.
The confirmation message will be displayed.
2. Press the (POWER) button or the POWER OFF button again.
Your projector is set in a standby state.
3. Turn off the “projector power switch and light power switch” of the projector.
Your projector is turned off.
1. Remove the lens cap.
2. Insert the administrator key horizontally and turn it to the vertical direction.
The administrator key can no longer be removed. The projector will not function unless the administrator key is
inserted.
Administrator switch
Administrator key