- 74 -
13> A Disable/Enable menu appears. Select
“
Enable
”
and press <Enter>.
Set Boot from SAN
Disable
Enable
14> Confirm that the setting of
“
Set Boot from SAN
”
is [Enable].
001: LPe1250-F8-N PCIe2.5Gb/s , x8
LPe1250-F8-N Node Name : 20000090FA211128
Seg#: 000 Bus#: 40 Dev#: 00 Func#: 00
RECONNECT DEVICES
Set Boot from SAN [Enable]
▶
Scan for Fibre Devices
▶
Add Boot Devices
▶
Delete Boot Device
▶
Change Boot Device Order
▶
Configure HBA and Boot Parameters
▶
Set Emulex Adapter to Default Settings
▶
Display Adapter Info
15> If any other ports of this product are connected to the Fibre Channel boot device, Press <Esc> key
to return to the adapter list and setting ports by the same steps from 5>.
16> Now, you have made settings to start installing an operating system on your Fibre Channel device.
Save changes and exit the STEUP utility of the computer, and start installation.