NEC NC2041L, Руководство по установке

Страница: 46 / 108

56
Setting Up Your Projector
3
Remove the terminal cover of the power supply terminals.
Remove the terminal cover by pulling it upward.
4
Insert the L/N lines of the AC power cable into the connection terminals, and tighten the screws.
Insert the crimping terminals of the AC power cable into the retaining holes of the connection terminals, and tighten
the screws with the Phillips-head screwdriver.
WARNING
Securely screw the AC power cable to the connection terminals. Also, after tightening the screws, make sure that all the
power cable lines are securely screwed. A failure to do this could result in an accident causing death, injury, etc.
5
Put the terminal cover on the power supply terminals.
Follow the reverse procedure to removal of the terminal cover.
6
Insert the grounding cable into the grounding terminal, and screw it.
Insert the crimping terminal of the grounding cable into the retaining hole of the connection terminal, and tighten the
screw with the Phillips-head screwdriver.
WARNING
Securely screw the grounding cable to the connection terminal. Also, after tightening the screw, make sure that the screw
is securely tightened. A failure to do this could result in an accident causing death, injury, etc.