NEC NC1040L-A, Руководство пользователя

Страница: 25 / 90

25
1. What’s in the Box? and the Names of the Projector Parts
NOTE
• Do not touch the air outlet and backside of the main unit when your projector is operating. Otherwise, the high
temperature may cause burns.
• Do not cover the air inlets and outlet while the projector is in operation. Insufficient ventilation leads to a rise of
the internal temperature and may cause a fire or malfunction.
1-3-3. Laser unit (NP-10LU01)
1
10
1
1
2
2
3
4
9
6
6
5
7
8
1. Air inlet
Take in outside air to prevent from overheating inside the laser unit. Do not cover.
2. Level adjusters (in four positions)
Use to fix the laser unit so that it will not move.
3. Main power switch
This is a main power switch.
4 AC power cable
This is the cable that supplies AC power to the laser unit. The AC power cable is not an accessory. Consult with your dealer/
distributor about the AC power cable.
5. Emergency stop switch
When an abnormality occurs during the operation of the projector or the laser unit, or an emergency (attendance in laser
projection range, earthquake/fire, etc.) occurs, you can immediately stop laser projection (emergency stop status) by
pressing this switch. The projector cannot be operated during emergency stop status. Rotate the switch to arrow direction
or pull it to release the emergency stop status.
6. STATUS indicator
It displays the operation status or the error status of the laser unit. (See page 66)
7. Switch for laser administrator
Insert the key for the laser administrator and rotate in the ON direction to turn on the power supply of the laser unit.