NEC N8406-023, Справочник по командам

Страница: 35 / 156

N8406-023 1Gb Intelligent L3 Switch Command Reference Guide (ISCLI) 35
The following table describes the CIST parameters.
Table 24 Common Internal Spanning Tree parameter descriptions
Parameter Description
CIST Root
Shows information about the root bridge for the Common Internal Spanning Tree
(CIST). Values on this row of information refer to the CIST root.
CIST Regional Root
Shows information about the root bridge for this MSTP region. Values on this row
of information refer to the regional root.
Priority (bridge)
The bridge priority parameter controls which bridge on the network will become
the STP root bridge.
MaxAge
The maximum age parameter specifies, in seconds, the maximum time the bridge
waits without receiving a configuration bridge protocol data unit before it
reconfigures the STP network.
FwdDel
The forward delay parameter specifies, in seconds, the amount of time that a
bridge port has to wait before it changes from learning state to forwarding state.
Hops
Shows the maximum number of bridge hops allowed before a packet is dropped.
Priority (port)
The port priority parameter helps determine which bridge port becomes the
designated port. In a network topology that has multiple bridge ports connected to
a single segment, the port with the lowest port priority becomes the designated
port for the segment.
Cost
The port path cost parameter is used to help determine the designated port for a
segment. Generally speaking, the faster the port, the lower the path cost. A
setting of zero (0) indicates that the cost will be set to the appropriate default after
the link speed has been auto-negotiated.
State
Shows the current state of the port. The state field can be one of the following:
Discarding
(
DISC
),
Learning
(
LRN
)
,
Forwarding
(
FWD
), or
Disabled
(
DSB
)
.
Role
Shows the current role of this port in the Spanning Tree. The port role can be one
of the following: Designated (DESG), Root (ROOT), Alternate (ALTN), Backup
(BKUP), Master (MAST), or Unknown (UNK).
Designated Bridge
Shows information about the bridge connected to each port, if applicable.
Information includes the priority (hex) and MAC address of the Designated Bridge.
Designated Port
The port ID of the port on the Designated Bridge to which this port is connected.
Information includes the port priority (hex) and the port number (hex).
Hello
The hello time parameter specifies, in seconds, how often the root bridge
transmits a configuration bridge protocol data unit (BPDU). Any bridge that is not
the root bridge uses the root bridge hello value.
Type
Type of link connected to the port, and whether the port is an edge port. Link type
values are AUTO, P2P, or SHARED.