19
2.5.
Removal procedure
A procedure until it removes a board from a server is shown. For this procedure, removal of a cable and the
removal procedure of a SFP+ module are described. When you remove individually, please carry out a procedure
until it removes the candidate for removal.
In addition, it is not necessary to turn the power of the server OFF, when a cable or SFP module is removed.
1
Remove the cable
Pull the cable with pressing down the latch of
the cable
IMPORTANT:
Please use a driver etc., when
you are hard to press down a
latch.
2
Remove the SFP+ module
1. Flip down the Lever of the SFP+ module
2. Remove the module from the slot toward to
the arrow
1
2
IMPORTANT:
Attach the dust cover to the SFP+
module. The cover has been
secured.
3
Attach the slot cover to the slot.
4
Remove the adapter from the server.
Turn the power off after shutdown process on
the OS. Then, unplug the power cord of the
server.
For
detail information, See the User’s guide
of the server.
