14
Lamp
ACT
LINK
ACT
LINK
TX
RX
TX
RX
P
O
R
T
1
P
O
R
T
0
SFP Slot
(PORT0)
ACT lamp
LINK lamp
ACT lamp
LINK lamp
SFP Slot
(PORT1)
PORT 1
PORT 0
Lamp
Status
Meaning
ACT
blink
(Green)
Actively transmitting or receiving data.
Off
No traffic
LINK
OFF
Not linked to LAN.
Or the Driver is unloaded
ON
(Green)
Linked to the LAN.
NOTE: Each lamp turns to OFF, when the power of the server has been down.
On the board, it has the lamp in which the condition of a SFP slot and a fan is shown.
SFP slot 0 lamp
SFP slot 1 lamp
FAN lamp
Lamp
Status
Meaning
SFP slot lamp
On(Orange) SFP+ module is not inserted
Off
SFP+ module is inserted
FAN lamp
On(Red)
Fan failure
Off
Fan is working normally.
NOTE: Each lamp is OFF, when the power of the server has been down.
IMPORTATNT
Once fan failure occurs, the connection will be disconnected and the port
goes to down. The reboot of the system is required to recover
If the failure occurred again, or could not connect to the network or not link up
after reboot, Please contact to reseller, sales agents or service representative.
