18
2.3.
SFP+ module installation
This document explains attachment of SFP+ module.
1.
Remove the slot cover from the panel of the board.
IMPORTANT:
Secure the removed the slot cover.
2.
Connect the SFP+ module.
IMPORTANT:
- When Connecting SFP+ module, Do not flip
the lever downward.
- Listen for an audible clicking sound when
the SFP+ module is inserted into the SFP
slot
2.4.
Attach the Network Cable
1.
Remove the dust cover from SFP+ module.
IMPORTANT:
Secure the removed the slot cover.
2.
Attach the network cable.
NOTE:
Check that the contact portion of a
connector is not dirty.
IMPORTANT:
Depending on a server (especially rack mountable type), a latch may break at the time of cable
attachment and detachment.
In that case, please press down a cable latch portion not to get stuck in the edge of the server
chassis, and push in firmly until heard clicking sound and a cable are fixed.
Please use a driver etc., when you are hard to press down a latch.
break
stick
Insert with pressing
down the latch
